Skip to main content

Slimline dishwashers

dishwasher

Register your appliance

Explore your appliance

dishwasher

Popular troubleshooting slimline dishwasher issues

My Hotpoint slimline dishwasher will not fill

If your Hotpoint slimline dishwasher will not fill then please ensure that your water taps at the back of the Hotpoint appliance are fully turned on and that the pipes are not kinked or squashed.

In order for a Hotpoint dishwasher to fill it must first drain. See “my Hotpoint dishwasher will not empty” below for advice on drainage plumbing.

If you need further assistance please call Hotpoint customer service on 0344 822 4224.

My Hotpoint slimline dishwasher will not empty

We recommend that you ensure that the waste hose has been correctly installed. If your Hotpoint appliance empties into an under sink waste system please ensure that the blanked end of the waste spigot has been removed. Ensure the filter in the base of the dishwasher is clean and free from any blockages.

Check that the waste hose has not become trapped or kinked as this could also result in a failure to empty the waste water out of your Hotpoint appliance.

If you need further assistance please call Hotpoint customer service on 0344 822 4224.

My cutlery is becoming brown/rusty

Cast iron pots and pans can start to rust where they’re cleaned in a dishwasher.

This can result in the rust spreading onto other items such as your cutlery or the tub of your dishwasher. We recommend you avoid washing cast iron pots and pans in your dishwasher.

If you need further assistance please call Hotpoint customer service on 0344 822 4224.

Cloudy/White marks are being left on my dishes/glassware

If you are finding at the end of a wash cycle that your dishes and glasses are appearing cloudy then this could be a possible calcium deposit. We also recommend use of our dishwasher salt, which improves washing performance and protects your dishwasher. Unique table form is easier to dose than ordinary dishwasher powder.

For more information on these products – click here or call our Hotpoint spare parts department on 0344 822 4224

Download your manual

Common error codes for slimline dishwashers

F01 - Anti-flooding overflow

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: OFF
  • Action: We recommend you call our customer service centre to book an engineer on: 0344 822 4224

    F03 - Water drain failure/ timeout

    Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF
  • Action: We recommend you check that the drain pipe and under sink plumbing for any blockages. If the fault continues please call our customer service centre to book an engineer on: 0344 822 4224

    F04 - Thermostat fault

    Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: OFF
  • Action: We recommend you call our customer service centre to book an engineer on: 0344 822 4224

    F11 - Wash pump failure

    Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON
  • Action: We recommend you call our customer service centre to book an engineer on: 0344 822 4224

    Keep your slimline dishwasher in tip top condition

    Shop by parts to maintain a healthy appliance or keep it looking showroom quality with our Hotpoint care products.

    ×

    Book a repair

    Close

    Which warranty plan are you on?

    Tell us so we can make sure you get through to the right people

    1 year free manufacturing warranty

    Other extended warranty provider

    My machine is
    out of
    warranty

    I am not sure which plan I am on

    Back

    Book a repair

    ×

    1 Year Manufacturing warranty

    Your machine is still under warranty from Hotpoint.

    Call us today to arrange a suitable day and time to repair your appliance.

    Need more help?

    03448 224 224

    Call centre is available between

    8:30am - 6:30pm Monday to Friday

    8:30am - 5:30pm Saturday

    9:30am - 3:30pm Sunday

    Back

    Book a repair

    ×

    Other extended warranty providers

    If you have another plan type, please refer to your plan provider to book in a repair

    Back

    Book a repair

    ×

    My machine is out of warranty

    Your machine is out of warranty from Hotpoint

    Call us today, and talk to one of our friendly advisers, who can talk through the best options for you.

    Need more help?

    03448 224 224

    You can request a repair online, quickly and easily by following the link below

    Book a repair online

    Can we help you with?

    How can we help?