Question 1

LEDs flashing on control panel

Accepted Answer

In most cases these are warning indications. Refer to your manuals for specific instructions. If you need further assistance please call Hotpoint customer service on 0344 822 4224.

Question 2

Poor extraction or airflow

Accepted Answer

If you get poor airflow or extraction from your cooker hood it is likely to be an issue with the vent hose or a simple case of the filters being blocked, please check all the items below:For extraction mode check vent hose or adaptor is not kinked or blocked For recirculation mode ensure carbon filters do not need replacement For both extraction and recirculation modes check grease filters are clean Check ducting change over lever in correct position Ensure there is sufficient room ventilation Ensure correct speed selected.If you need further assistance please call Hotpoint customer service on 0344 822 4224.

Question 3

My lights are not working

Accepted Answer

Please check the lamp for failure and also ensure the lamp switch is on. This could also be issues with the lamp assembly, choke or PCB controlling lights, in these cases please call Hotpoint customer service on 0344 822 4224.

Question 4

My cooker hood does not operate

Accepted Answer

Please follow the below checklist to rectify the issue:Check electrical connection switched on Check fuse has not blown Ensure the speed switch is selecting a speed Ensure door is open on integrated models.If you need further assistance please call Hotpoint customer service on 0344 822 4224.